Quick Specs
| Category | Network Wall Faceplate, 1 port |
| Item number | HEA8601 |
| Plate dimensions | 86 (L) x 86 (W) mm, 10.2 mm thick |
| Material | High-impact ABS |
| Ports | 1 port available |
| Compatibility | RJ45 keystone jacks and fiber optic connectors |
The Heizka network wall faceplate HEA8601 is the square 86 x 86 mm outlet plate used with the standard 86 mm back box. It is a simple and compact design in ABS with high impact resistance, sized at 86 (L) x 86 (W) mm and 10.2 mm thick, so it sits close to the wall in an office, a hotel room or a hospital corridor without protruding into the space.
What distinguishes it in practice is the assembly method: press the side button and the frame opens easily for assembly, so the jack is clipped in without levering the plate apart with a screwdriver. The aperture accepts RJ45 keystone jacks and fiber optic connectors, which means the same plate can serve a copper outlet today and a fiber-to-the-office outlet after a refit. Marking is convenient and clear, and the front frame is available flat or angled.
Features
- HEA8601 faceplate, 86×86 mm, 1 port
- Simple and compact design in ABS with high impact resistance
- Press the side button and the frame can easily be opened for assembly
- Available in 1 port
- Convenient and clear marking
- Front frame can be flat or angled
- RJ45 keystone jacks and fiber optic connectors are compatible with the front plate
- Faceplate dimensions: 86 (L) x 86 (W) mm, 10.2 mm thick
Standard Compliance
Heizka accessories are built to the same structured cabling references that govern the rest of the channel: ISO/IEC 11801 for generic customer-premises cabling and the ANSI/TIA-568 series for commercial building telecommunications cabling. Components are RoHS compliant, and selected items carry UL recognition. Installed and certified as a complete Heizka channel, the link qualifies for the Heizka extended system warranty.
Ordering Information
| Item number | Description | Plate size | Ports |
| HEA8601 | Heizka network wall faceplate, high-impact ABS | 86 x 86 mm, 10.2 mm thick | 1 |
The network wall faceplate is ordered separately from the module it carries. Combine it with the HEAKJU6W CAT6 keystone jack for a copper outlet, or with a fiber optic connector where the outlet terminates a fiber drop.
Flat or Angled Front Frame on the Network Wall Faceplate
| Front frame | Cord exit | Typical application |
| Flat | Cord leaves the outlet square to the wall | Desk-height outlets, trunking and skirting positions |
| Angled | Cord is guided downwards as it leaves the outlet | Outlets behind furniture, where a square exit would force a tight bend |
Both frames use the same 86 x 86 mm plate footprint and the same 1 port aperture, so the decision is about how the patch cord leaves the wall rather than about which jack can be fitted.
Network Wall Faceplate Installation Notes
Press the side button and open the frame before the jack is terminated, so the module can be clipped in without straining the terminated pairs. Leave a service loop in the back box, keep the pair twists intact to the punch-down, and complete the marking as the outlet is finished rather than at the end of the project. On a mixed copper and fiber floor, using one plate type for both keeps the wall consistent and simplifies the spares holding.
Because the network wall faceplate takes both RJ45 keystone jacks and fiber optic connectors, a building can be first-fixed with one plate schedule and the module decided later. That is a practical advantage on fit-out projects where the tenant is unknown at the time the walls are closed.
⬇ Download Catalogue / Datasheet (PDF)
Heizka Structured Cabling Catalogue — searchable PDF, no registration required. More files on the Resource page.
Frequently Asked Questions
The HEA8601 network wall faceplate measures 86 (L) x 86 (W) mm and is 10.2 mm thick, which is the standard square plate footprint used with an 86 mm back box.
Yes. RJ45 keystone jacks and fiber optic connectors are both compatible with the front plate, so the same plate can be used for a copper outlet or a fiber outlet.
Pressing the side button lets the frame open easily for assembly, so the module is clipped in without levering the plate apart and risking damage to the finish.
This network wall faceplate item number is the 1 port version. Where two services land at the same position, fit two plates or specify the outlet as two positions at design stage.
It is a simple and compact design in ABS with high impact resistance, which is what allows a thin 10.2 mm plate to survive knocks in a corridor or a classroom.
Choose angled where the outlet sits behind furniture and a square cord exit would force a tight bend; otherwise the flat frame is the usual choice.
Packaging & Delivery
Each Heizka network wall faceplate is packed by item number with the plate size and port count marked on the label, so the correct part can be picked, verified and re-ordered without opening the pack. Bulk carton counts are available for work-area roll-outs.
Heizka Cable — Designed in the USA, distributed in 20+ countries worldwide.
