Quick Specs
| Category | CAT6 Patch Panel, Unshielded, 19″ rack mount |
| Port capacity | 24 port (1U) / 48 port (2U) |
| Connector | RJ45, IDC phosphor bronze termination, T568A/T568B wiring |
| Frame material | Black steel, powder coating |
| Compliance | ANSI/TIA 568-C.2 ISO/IEC 11801 Class E |
The Heizka CAT6 Patch Panel, Unshielded is the central termination point that keeps a structured cabling installation organised, labelled and easy to service. Built on a 19-inch rack-mount frame in powder-coated black steel, each port punches down onto phosphor-bronze IDC contacts wired to T568A/T568B, so horizontal CAT6 cable runs land on a panel that meets and exceeds Category 6 performance.
A snap-in port design speeds up installation and future moves, adds or changes, while convenient, clear port marking and a rear cable manager keep dressing neat behind the rack. The panel is available in 24-port (1U) and 48-port (2U) versions, so a single comms room or a full data-centre row can be sized from the same product family. This CAT6 patch panel ships fully assembled and ready to rack-mount straight out of the box.
Features
- ✓Meets and exceeds Category 6 standard performance
- ✓Snap-in port design for easy installation and maintenance
- ✓Convenient and clear port marking
- ✓Easy for management and operation
- ✓Integrated rear cable manager keeps patch cords dressed
- ✓Available in 24 ports (1U) and 48 ports (2U)
- ✓Black steel frame with powder coating for long-term durability
Standard Compliance
ANSI/TIA 568-C.2 Category 6 ISO/IEC 11801 Class E
Channel and component requirements follow TIA-568-C.2 Category 6 and the ISO/IEC 11801 Class E cabling standards.
Ordering Information
| Item # | Description |
|---|---|
| HEAP60U124 | CAT6 24 port Patch Panel Unshielded, 1U |
| HEAP60U248 | CAT6 48 port Patch Panel Unshielded, 2U |
Technical Specifications
Construction & Materials
| Frame material | Black steel frame with powder coating |
| Port module | Flame-retardant and impact-resistant thermoplastic |
| Contact | IDC, phosphor bronze, 50µm gold-plated RJ45 pin |
| Wiring scheme | T568A / T568B |
| Mounting | 19″ rack mount, single bar |
| Port capacity | 24 port (1U) or 48 port (2U) |
Electrical Performance
Physical Performance
24-Port (1U) vs 48-Port (2U) — Which Size Do You Need?
| Feature | HEAP60U124 (24-Port, 1U) | HEAP60U248 (48-Port, 2U) |
|---|---|---|
| Rack space | 1U | 2U |
| Port count | 24 | 48 |
| Wiring scheme | T568A / T568B | T568A / T568B |
| Compliance | ANSI/TIA 568-C.2, ISO/IEC 11801 Class E | ANSI/TIA 568-C.2, ISO/IEC 11801 Class E |
| Best for | Small comms rooms, single-switch deployments | Data centres and floors needing higher port density per U |
Frequently Asked Questions
Unshielded (UTP). Each port terminates onto IDC phosphor-bronze contacts without a foil or braid screen, matching an unshielded CAT6 horizontal run and outlet.
Both. Every port is labelled for T568A and T568B, so the installer can follow whichever wiring convention the project specifies without needing a different panel.
Count the active drops the panel needs to terminate today plus reasonable headroom for growth. A 24-port (1U) panel suits a small comms room or single switch; a 48-port (2U) panel saves rack space when the floor count is higher.
Yes. A rear cable manager is built into the frame, so incoming horizontal cable can be dressed and strain-relieved before it reaches the punch-down contacts.
Each port is clearly numbered on the front label strip, so patch cords can be traced back to the correct outlet quickly during moves, adds and changes without re-tracing cable runs.
Packaging & Delivery
Each Heizka CAT6 Patch Panel Unshielded ships fully assembled in a protective carton sized to the 1U or 2U frame, with mounting screws included. The powder-coated steel finish and port modules are packed to arrive ready for immediate rack installation.
Heizka Cable — Designed in the USA, distributed in 20+ countries worldwide.
