Overview
The Heizka Trumpet Spillout Kit protects fibre where it leaves the raceway. The flared, trumpet-shaped mouth limits the bend radius of the cable at the exit point, so patch cords are not kinked or over-bent as they drop out of a spillover junction or off the end of a run.
The 60 mm kit installs by hand with no tools. The 120 mm and 240 mm kits fix to the channel with T-shape screws and twist head nuts.
Key Features
- Limits cable bend radius at the exit – 40 mm on the 60 mm kit, 2 in. (50.8 mm) on the 120 mm kit.
- Smooth flared mouth protects the cable jacket where fibre leaves the pathway.
- 60 mm kit installs by hand, no tools needed.
- Fits spillover junctions, horizontal tee exits and open channel ends.
- Self-extinguishing plastics – flame-retardant material to UL94-V0.
Technical Specifications
| Series | Item No. | Name | W (mm) | H (mm) | Overall (mm) | Colour | Material |
|---|---|---|---|---|---|---|---|
| 60 | 311L0 | 60mm Trumpet spillout kit | 60 | 60 | 128 × 60 × 83 | Yellow | PVC/ABS |
| 120 | LL23B | 120mm Trumpet spillout kit | 120 | 100 | 179 × 70 × 125 | Yellow | PVC/ABS |
| 240 | 311S0 | 240mm Trumpet spillout kit | To be confirmed | To be confirmed | To be confirmed | Yellow | PVC/ABS |
Installation notes
- 60mm: limits the cable bend radius to 40 mm when exiting from a 60 x 60 exit or from 60 x 60 raceway. Installation by hand, no tools needed.
- 120mm: limits the cable bend radius to 2 in. (50.8 mm) when exiting from 120 x 100 channel, a 120 x 100 horizontal tee fitting, or a 120 x 100 exit on a 240 x 100 vertical tee. Installation needs T-shape screw (LT5B4) and twist head nut, 4 pieces each.
- 240mm: limits the cable bend radius to 40 mm when exiting from a 240 x 100 raceway or from a 240 x 100 horizontal tee. Installation needs T-shape screw (LT5B4) and twist head nut, 4 pieces each.
- Flame retardant: UL94-V0.
- The dimensions printed against the 240 mm trumpet spillout kit in the source catalogue duplicate those of a 60 mm fitting and are clearly a printing error. They are therefore shown as “to be confirmed” rather than reproduced – please request the correct figures from Heizka.
Dimensions are quoted from the Heizka Fibre Management System catalogue. Specifications are subject to change without notice – please confirm critical dimensions with Heizka before ordering.
Standards & Compliance
- Flame retardancy: UL94-V0 self-extinguishing plastics.
- Material: PVC / ABS mouldings; steel support hardware is electroplated zinc with a powder-coated finish.
- All plastic-based components are specified to be RoHS compliant.
- Colour: high-visibility yellow, identifying the fibre pathway.
- Environment: indoor use in data centres, telecommunication exchanges and equipment rooms.
Typical Applications
- Data centres and server rooms – fibre patch cord routing between racks and rows.
- Telecommunication exchanges and central offices.
- Optical distribution frames (ODF) and fibre cross-connect areas.
- Any installation where fibre must be segregated from copper services and protected end to end.
Download
Catalogue extract for this product, taken from the Heizka Fibre Management System catalogue:
Heizka Cable — Designed in the USA, distributed in 20+ countries worldwide.
