Overview
Heizka supplies a complete set of installation hardware and mounting support kits for the fibre management system. Each kit lists the bolts, nuts, bars, brackets and fixtures needed for one specific mounting method, so an installer can order a complete, verified bill of materials rather than assembling parts individually.
Kits are available for ceiling suspension, cabinet-top mounting, aluminium and flat-steel ladder-rack side support, strut-channel mounting, wall mounting and under-access-floor mounting.
Key Features
- One kit per mounting method – ceiling, cabinet top, ladder rack, strut channel, wall and under-floor.
- Plastic T-shape bolt and twist nut fixings attach the raceway without drilling it.
- Steel components are electroplated zinc with a powder-coated finish.
- Covers the 60 × 60 mm series as well as the 120 mm and 240 mm series.
- Lets the raceway be re-routed or extended later using the same fixing system.
Technical Specifications
Ceiling Mounting Support Kit (suits all sizes)
- LT147 Plastic T-shape bolt × 2
- LT343 Plastic twist nut × 2
- LT630 Ω Bracket × 2
- Dual hole bar × 1
- Expansion bolt × 2
- Threaded rod × 2
- Flange nut × 6
Adjustable Cabinet Top Support Kit (suits all sizes)
- LT147 Plastic T-shape bolt × 2
- LT343 Plastic twist nut × 2
- Adjustable cabinet top support bar × 1
- LST30 Adjustable cabinet top support stand × 1
- M8 flange nut × 6
- M8 bolt × 6
Aluminium Ladder Rack Side Support (120 mm and 240 mm only)
- LT147 Plastic T-shape bolt × 2
- LT343 Plastic twist nut × 2
- Single hole bar × 1
- LD120 Ladder rack bracket × 1
- Threaded rod × 1
- M6 bolt × 2
- Flange nut × 4
- LT344 Flexible nut × 2
Flat Steel Ladder Rack Side Support (120 mm and 240 mm only)
- LT147 Plastic T-shape bolt × 2
- LT343 Plastic twist nut × 2
- Single hole bar × 1
- LD360 Flat steel fixture × 2
- Flange nut × 4
- Threaded rod × 1
Strut Channel Mounting Support (120 mm and 240 mm only)
- LT147 Plastic T-shape bolt × 2
- LT343 Plastic twist nut × 2
- Single hole bar × 1
- Strut channel clamp kit × 1
- Threaded rod × 1
- Flange nut × 4
60 x 60 Ladder Rack Mounting
- LD360 Flat steel fixture × 2
- M16 flange nut × 4
- M16 threaded rod × 1
- Single hole bar × 1
- M6 flange nut × 2
- M6 bolt × 2
60 x 60 Ladder Rack Mounting (hook)
- Hook screw × 1
- M6 × 14 bolt × 1
- Ladder rack fixture × 1
- M6 flange nut × 2
60 x 60 Wall Mounting
- M6 × 14 bolt × 2
- Holder × 1
- Flange nut × 4
- Expansion bolt × 2
60 x 60 Under Access Floor Mounting
- M6 × 14 bolt × 2
- Holder × 1
- M6 flange nut × 2
- M8 flange nut × 2
- Pedestal clamp × 1
- M8 bolt × 2
Referenced part numbers
LT147, LT343, LT344, LT630, LT5B4, LT338, LD120, LD360, LST30
Installation notes
- Kit contents are reproduced exactly as listed in the catalogue. Individual dimensions for the LT-series screws, nuts and brackets are not published in this catalogue extract and are therefore not quoted here – please request them from Heizka.
Dimensions are quoted from the Heizka Fibre Management System catalogue. Specifications are subject to change without notice – please confirm critical dimensions with Heizka before ordering.
Standards & Compliance
- Flame retardancy: UL94-V0 self-extinguishing plastics.
- Material: PVC / ABS mouldings; steel support hardware is electroplated zinc with a powder-coated finish.
- All plastic-based components are specified to be RoHS compliant.
- Colour: high-visibility yellow, identifying the fibre pathway.
- Environment: indoor use in data centres, telecommunication exchanges and equipment rooms.
Typical Applications
- Data centres and server rooms – fibre patch cord routing between racks and rows.
- Telecommunication exchanges and central offices.
- Optical distribution frames (ODF) and fibre cross-connect areas.
- Any installation where fibre must be segregated from copper services and protected end to end.
Download
Catalogue extract for this product, taken from the Heizka Fibre Management System catalogue:
Heizka Cable — Designed in the USA, distributed in 20+ countries worldwide.
