Overview
The Heizka Adjustable Cabinet Top Support carries the fibre raceway directly above a row of equipment cabinets or racks. The stand is height-adjustable from 50 to 200 mm, so the pathway can be set at a consistent height above cabinets of differing sizes.
The support bar bolts to the stand and the raceway clamps to the bar with plastic T-shape bolts and twist nuts, giving a clean, repeatable installation along the top of a cabinet row.
Key Features
- Height adjustable over a 50–200 mm range.
- Support bars sized for the 120 mm and 240 mm raceway series; the stand suits all sizes.
- Mounts the raceway on top of equipment cabinets, racks and frames.
- Electroplated zinc with powder-coated finish.
- Assembles with plastic T-shape bolts and twist nuts – no drilling of the raceway required.
Technical Specifications
Adjustable Cabinet Top Support Bar
| Item No. | L (mm) | Overall (mm) | Application range | Surface treatment |
|---|---|---|---|---|
| LI2G1 | 230 | 230 × 50 × 50 | 120 straight section | Electroplated zinc, powder coated |
| LI2G2 | 350 | 350 × 50 × 50 | 240 straight section | Electroplated zinc, powder coated |
Suits raceway sizes up to 240 mm; mounts with item no. LST30.
Adjustable Cabinet Top Support Stand
| Item No. | H (mm) | Overall (mm) | Application range | Surface treatment |
|---|---|---|---|---|
| LST30 | 200 | 100 × 50 × 200 | 50–200 | Electroplated zinc, powder coated |
Suits fibre raceway installation at cabinet top, mounting with the adjustable cabinet top support bar.
Cabinet top support kit contents
- LT147 Plastic T-shape bolt × 2
- LT343 Plastic twist nut × 2
- Adjustable cabinet top support bar × 1 (or dual-hole bar × 1)
- LST30 Adjustable cabinet top support stand × 1 (kit on catalogue page 58 shows × 2)
- M8 flange nut × 6
- M8 bolt × 6
Installation notes
- The cabinet top support kit shown on catalogue page 58 lists the adjustable cabinet top support stand × 2; the installation page on 59 lists × 1. Please confirm the quantity for your configuration with Heizka.
Dimensions are quoted from the Heizka Fibre Management System catalogue. Specifications are subject to change without notice – please confirm critical dimensions with Heizka before ordering.
Standards & Compliance
- Flame retardancy: UL94-V0 self-extinguishing plastics.
- Material: PVC / ABS mouldings; steel support hardware is electroplated zinc with a powder-coated finish.
- All plastic-based components are specified to be RoHS compliant.
- Colour: high-visibility yellow, identifying the fibre pathway.
- Environment: indoor use in data centres, telecommunication exchanges and equipment rooms.
Typical Applications
- Data centres and server rooms – fibre patch cord routing between racks and rows.
- Telecommunication exchanges and central offices.
- Optical distribution frames (ODF) and fibre cross-connect areas.
- Any installation where fibre must be segregated from copper services and protected end to end.
Download
Catalogue extract for this product, taken from the Heizka Fibre Management System catalogue:
Heizka Cable — Designed in the USA, distributed in 20+ countries worldwide.
