Quick Specs
| Category | Optic Fibre Patch Panel, Universal, adaptor unloaded |
| Item number | HEAOU1924S |
| Height | 4U |
| Capacity | 96 port SC, ST, FC / 192 port duplex LC |
| Mounting | 19-inch standard rack, lightweight |
| Fiber count options | 24C, 36C, 48C, 96C, 144C, 192C |
The Heizka fiber patch panel HEAOU1924S is the 4U, 19-inch universal enclosure at the top of the Heizka sliding-tray range, specified where a single termination point has to carry a very high fiber count. It is supplied adaptor unloaded, so the panel plate is chosen to match the connector family actually being installed rather than being fixed at the factory.
Capacity is 96 port SC, ST, FC, or 192 port duplex LC in the same 4U frame, which is what makes it a main distribution or campus aggregation panel rather than a floor panel. Because different panel plates are available for different adaptor interfaces, one enclosure type can be standardised across a site while individual positions are populated with whatever the link requires.
Features
- HEAOU1924S Optic Fibre Patch Panel (Universal, 96 port SC, ST, FC, 192 port duplex LC, adaptor unloaded, 4U)
- Height: 4U
- 19-inch standard rack mounting, lightweight
- Different panel plates for different adaptor interfaces
- 24C, 36C, 48C, 96C, 144C, 192C optional, with or without fibre splice and fibre optic adaptors
- Easy to manage and operate
Standard Compliance
Heizka accessories are built to the same structured cabling references that govern the rest of the channel: ISO/IEC 11801 for generic customer-premises cabling and the ANSI/TIA-568 series for commercial building telecommunications cabling. Components are RoHS compliant, and selected items carry UL recognition. Installed and certified as a complete Heizka channel, the link qualifies for the Heizka extended system warranty.
Ordering Information
| Item number | Height | Capacity | Adaptors | Fiber count options |
| HEAOU1924S | 4U | 96 port SC, ST, FC / 192 port duplex LC | Unloaded | 24C, 36C, 48C, 96C, 144C, 192C |
Because the fiber patch panel HEAOU1924S is supplied adaptor unloaded, the order should state the fiber count, whether fiber splice and fiber optic adaptors are required, and which adaptor interface the panel plates must carry. Adaptors are ordered from the Heizka optical fiber adaptor range and pigtails from the patch cord and pigtail range.
Choosing Between the Heizka Sliding-Tray Patch Panels
| Item number | Height | Where it fits |
| HEAOU481S | 1U | Floor or edge distributors with a modest fiber count |
| HEAOU962S | 2U | Mid-size distributors and building entrance facilities |
| HEAOU1443S | 3U | Larger building distributors and aggregation points |
| HEAOU1924S | 4U | High-density main distributors, campus aggregation and data centre rows |
The 1U, 2U and 3U models are documented on the HEAOU481S, HEAOU962S and HEAOU1443S page; the HEAOU1924S extends the same sliding-tray family to 4U. A full overview of the range sits on the fiber accessories page.
HEAOU1924S Installation Notes
Plan the rack elevation so the sliding tray can be drawn fully forward without fouling the cable management above and below it, and leave the tray travel free of patch cords tied off to the frame. Terminate to the panel plate that matches the connector family in use, keep splice storage inside the tray rather than looping fiber outside the enclosure, and label both the front adaptor position and the tray so a fiber can be traced without opening the panel.
The HEAOU1924S is heavy once fully loaded with pigtails and splice trays, so mount it on rack rails rather than on a single pair of front posts wherever the cabinet allows. Where several HEAOU1924S panels are stacked in one distributor, leave a management position between them so the trays of the panel below can still be drawn out with the panel above populated.
⬇ Download Catalogue / Datasheet (PDF)
Heizka Structured Cabling Catalogue — searchable PDF, no registration required. More files on the Resource page.
Frequently Asked Questions
It is a universal 4U panel rated at 96 port SC, ST, FC, or 192 port duplex LC, with fiber count options of 24C, 36C, 48C, 96C, 144C and 192C.
No. The HEAOU1924S is supplied adaptor unloaded, and the fiber count options are available with or without fiber splice and fiber optic adaptors, so the panel is configured to the link rather than the other way round.
Different panel plates are available for different adaptor interfaces, covering SC, ST and FC in the simplex count and duplex LC in the high-density count.
The panel is 4U high and mounts in a 19-inch standard rack. Allow clearance in front of the rack for the sliding tray to be drawn out during splicing and later maintenance.
They are the same sliding-tray family at different heights: HEAOU481S at 1U, HEAOU962S at 2U, HEAOU1443S at 3U and HEAOU1924S at 4U. Choose the height from the fiber count the position has to terminate.
Yes. The 192 port duplex LC capacity in 4U, together with the sliding tray and the choice of panel plates, is aimed at high-density main distribution and campus aggregation as well as data centre rows.
Packaging & Delivery
Each Heizka fiber patch panel is packed by item number with the height, capacity and adaptor configuration marked on the label, so the correct enclosure can be picked, verified and re-ordered without opening the pack. Panel plates, adaptors and pigtails are ordered alongside the enclosure.
Heizka Cable — Designed in the USA, distributed in 20+ countries worldwide.
